Anytime house maintenance explains a few of the house components that do not necessarily depend on seasonal preventive repairs. Of course, based on your observation of those components, and their quality, you can implement some kind of a schedule that will help in monitoring and servicing.
1. Change or clean your forced air heating / AC system filter every 1-4 months based on type and usage.
2. Replace caulking / silicon around your tub, shower stall and sink whenever it starts separating from surfaces.
3. Inspect your bathroom tiled walls for cracks and missing grout – fill the gaps as soon as possible to prevent water penetration and tile backing wall damage.
4. Periodically check the main water shutoff valve and individual plumbing fixtures valves – might leak if left untouched for several years, might not operate at all and start leaking if you force them to turn. If it turns freely, open it all the way, and then back up a little – this helps to prevent the valve from being stack.
There are three reasons for which I put together this Whole House Fan ShutterCover Trim to Fit Review; The ShutterCover Trim to Fit manufacturer contacted me with some information about his product and I decided that it is worth to mention it on my website. For your information – I’m not affiliated with the manufacturer,…
Fitting New Condo Safety Issues and defects into the Top 10 list is going to be a little tight, but you can find out about many other bad things from the Chicago condos by checking entire Chicago Condo Inspection Manual. You would think that after such a spectacular real estate meltdown, something would change in…
This part will cover Chicago condo inspection combustion air requirements for the gas furnace and water heater installed inside your condo closet / utility room (not in the building common areas) – this is an extremely important section and you may need measuring tape.
All gas burning appliances require oxygen for a proper, complete and safe combustion process / without creating measurable and dangerous amounts of Carbon Monoxide.
Because Carbon Monoxide has no taste, smell or color you must have a CO detector installed in your condo to alert you about any unsafe levels (check Chicago smoke and Carbon Monoxide detector requirements).
Gas burning appliances vent pipes produce heat when discharging exhaust gases to exterior.
Temperature of the vent pipe is transferred to the surrounding area and all the materials that are in the vent pipe vicinity. Problems start arising if those materials are combustible and located to close to the furnace, water heater vent pipe. If you apply heat to a combustible material for some period of time (that varies between materials), its point of ignition will gradually get lower and eventually little heat will be required to start a fire – that’s why you need a clearance between the vent pipe and a combustible material.
Black mold growing in the attic does not necessarily cause your house air contamination. However, mold usually becomes an issue when discovered during the home inspection. In addition, depending on the attic mold contamination extent, correcting the problem could make a significant hole in your budget.